Introducing our durable and reliable "SolarSlab" concrete slab flat roof solar mounting system. Manufactured in our own factory for guaranteed quality.
Wind Speed : < 42m/s Snow load : 1 .4 KN/m2 Standard : AS1170.2 Degree : 0*-70 Arrangement : Vertical Warranty: 10 years 1.Install front bracket and rear post on concrete block, and then install main beam on the top of post, other terminal connect with front bracket. 2.Install mounting rail upon main beam 3.Install PV panels by mid clamp and end clamps.
Mounting rail/Main beam
Front bracket/Connection
Rear Post
End clamp
Mid clamp kit
Simple triangle solar mounting system (With lowest side of PV panel height demand) Also it’s triangle structure, just only we added front post which instead of front bracket. By this type, mounting brackets will be very steady, and ensure resist big wind and snow etc.
Mounting rail/Main beam
Connection
Front Post 、Rear Post
End clamp kit
Mid clamp kit
Specification： Wind Speed ：< 42m/s Degree ：0°-70 Installation Manual： 1.Install front post and rear post on concrete block by hex bolt , and then install main beam on the top of posts by connection parts. 2.Install mounting rail upon main beam 3.Install PV panels by mid clamp and end clamps.For this type solar mounting structure, we need to install ballast beam with vertical at first, and when all triangle brackets installed completely, we need to install secondary ballast beam again.Specification: Wind Speed : < 42m/s Snow load : 1.4 KN/m2 Standard : AS1170.2 Degree : 0°-70 Arrangement : Vertical Warranty: 10 years Installation Manual : 1. Install ballast beam first, and then install front post and rear post on beam, and then install main beam on top of posts. 2. Install mounting rail upon main beam by hex bolts and square nuts. 3. Install PV panels by mid clamp and end clamps. 4. Install secondary beam with landscape, and then use concrete block as ballast to fix all structure.
Mounting rail, Main beam, Rear Post
Front bracket, Connection
Down Beam
End clamp kit
Mid clamp kit
This type solar mounting brackets is very steady and no need to destroy rooftop. When installed, use concrete blocks as ballast to fix all solar mounting structure, easy to install and save cost.Specification : Wind Speed : < 42m/s Snow load : 1.4 KN/m2 Standard : AS1170.2 Degree : 0°-70 Arrangement : Vertical Warranty: 10 years Installation Manual : 1.Install front bracket and rear post on ballast beam by connection, and then install main beam on top of post, another end connect with front bracket. 2.Install mounting rail upon main beam by hex bolt and square nut. 3.Install PV panels by mid clamp and end clamps.
Front Post, Rear Post
Mounting rail、Main beam
Ballast Beam
End clamp kit
Mid clamp kit
Mainly this type solar mounting system used for flat roof which area nearby sea. When installed, use concrete blocks as ballast to fix all solar mounting structure, no need to drill roof surface.Specification: Wind Speed : < 42m/s Snow load : 1.4 KN/m2 Standard : AS1170.2 Degree : 0°-70 Arrangement : Vertical Warranty: 10 years Installation Manual: 1. Install triangle mount kit, which include bottom beam, main beam and rear post . All parts connected by bolts group. 2.Install mounting rail upon main beam by L-connection or bolts group directly. 3.Install PV panels by mid clamp and end clamps.
Triangle mount kit
Mounting rail
Splice
End clamp kit
Mid clamp kit
As bellow, Chasun Solar provide some other types of flat roof solar mounting system Two rows with landscape solar mounting system
1.Install ballast beam, and then install front bracket and rear post on this beam, and then install main beam on top of post, another end connect front bracket.2.Install mounting rail upon main beam, and then install secondary ballast beam on last ballast beams. 3.Install PV panels by mid clamp and end clamps.
Main beam, Rear Post
Front bracket、Connection
Ballast beam
End clamp kit
Mid clamp kit
Some area with big wind, Chasun Solar will provide one solution as bellow: One row with landscape solar mounting system- ballast type By this type, make all mounting structure steady and avoid big wind speed.
1.Install bottom beam first, and then install front bracket and rear post on beam; 2.Install ballast beam upon bottom beam, and then use block as ballast 3.And then install PV panels on top of rear post and front bracket directly. Install windshield back of PV panels finally. (Here no need to use mounting rail)
